IJERPH, Vol. 15, Pages 2162: Removal of Cr (VI) from Simulated and Leachate Wastewaters by Bentonite-Supported Zero-Valent Iron Nanoparticles

IJERPH, Vol. 15, Pages 2162: Removal of Cr (VI) from Simulated and Leachate Wastewaters by Bentonite-Supported Zero-Valent Iron Nanoparticles

International Journal of Environmental Research and Public Health doi: 10.3390/ijerph15102162

Authors: Fayuan Wang Weiwei Yang Fangyuan Zheng Yuhuan Sun

Zero-valent iron (Fe0) nanoparticles (NPs) have shown excellent ability to remove contaminants hexavalent chromium (Cr(VI)) from aquatic systems. Use of support materials can help to prevent oxidation and aggregation of Fe0NPs, and thus enhance their remediation efficiency. However, most previous studies were conducted using artificially synthetic wastewater, and little is known on the remediation effects of supported Fe0NPs on actual wastewaters containing Cr(VI). Here, bentonite-supported Fe0NPs (BFe0NPs) with 1–5% of bentonite were prepared and characterized using scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques. Batch experiments were performed to study Cr(VI) removal by the selected BFe0NPs from a simulated wastewater and a leachate wastewater originating from a Cr slag heap-polluted soil. The results show that Fe0NPs were uniformly dispersed on the bentonite, leading to a decreased aggregation of NPs, and the optimal mass ratio of bentonite was 4%. Batch experiment results show that lower pH values favored Cr(VI) removal by BFe0NPs. The removal percentage of Cr(VI) was higher than 90% for both wastewaters when the pH value was 2.0, but decreased significantly as pH value increased. Cr(VI) removal reaction was quite fast within the initial 10 min, and at least 85% of Cr(VI) was removed for both wastewaters. Cr(VI) removal percentage increased with increasing BFe0NPs dosages ranging from 30 to 60, but remained almost unchanged when the Fe/Cr mass ratio increased to above 60. The reaction of BFe0NPs to remove Cr(VI) followed the pseudo second-order reaction model. In most cases, the removal rates of Cr(VI) were higher in simulated wastewater than in leachate wastewater, but all approached 100% at the optimal conditions. Our present results show that BFe0NPs with 4% bentonite are efficient for treatment of Cr(VI)-containing wastewaters.

https://ift.tt/2NU2GkJ